The TRIO is a remotely controlled, high power, high isolation, single radio antenna switch operating up to 70MHz. Modern, simple to setup, intuitive to use. It connects up to three (3) transceivers allowing to share common power amplifier or antenna tuner between transceivers, feeding up to six (6) RX/TX antennas, and selecting one of up to three (3) RX only antennas including a switchable bypass for a pre-amplifier or attenuator. All of this without rewiring any control or RF cable.
TRIO contains two units, a desktop TRIO CONTROLLER and an indoor TRIO SWITCH, connected by a single CAT5 cable to place both boxes optimally, thus avoiding bulky RF feedlines going to the controller located on the operating desk. The TRIO controller interconnects transceivers and amplifier control ports, providing built-in band decoder for each transceiver and one band encoder for the automatic power amplifier or tuner supporting CI-V, BCD, UDP, PTT, ALC, and INHIBIT for all connected devices. The controller unit enables complete antenna management using front panel controls and a built-in responsive web server user interface that allows the user to control the TRIO from any mobile device or computer, either locally or remotely over the Internet from a browser.
A separate TRIO switch box connects all RF connections from the transceivers, amplifier, and antennas. In addition to six (6) RX/TX antennas and three (3) RX antennas, TRIO supports up to four (4) optional ARXC.REL boxes connected to TRIO via RS-485 using CAT5 cable over distances up to 1500 m or up to 5000 m using optional ARXC.LoRa modules. Each ARXC.REL box provides four (4) individual SPDT contacts, controlled by the user-selectable template to control all types of external antenna switches including receive antenna arrays. For each ARXC.REL box, TRIO provides separate control and real-time status on the front panel in parallel with the web server user interface.
Price: €475.00
No comments:
Post a Comment